No products in the cart.
Trig TY91 & TY92 Radio Wiring Harness – 39″
Trig’s TY91 & TY92 radio wiring harness is a 39-inch long cable harness that connects a TY91 or TY92 remote mounted VHF radio unit to a panel mounted TC90 control head.
$309.00
Trig TT21 & TT22 Wiring Harness & TN72 Connection – 118″
Trig’s TT21 & TT22 wiring harness with TN72 connections is a 118-inch short cable harness that connects a TT21 or TT22 remote mounted transponder unit to a panel mounted TC20 control head as well as a TN72 GPS Receiver.
$223.00Trig TY91 & TY92 Radio Wiring Harness – 118″
Trig’s TY91 & TY92 radio wiring harness is a 118-inch long cable harness that connects a TY91 or TY92 remote mounted VHF radio unit to a panel mounted TC90 control head.
$338.00
GMT232 Hand Crimp Tool
The Daniels GMT232 Hand Crimp Tool is designed to crimp low profile environmental splices.
$247.50GMT232 Hand Crimp Tool
$247.50
Pitot Static Nylon Fittings | Assorted
The Pitot Static Nylon Fittings Kit contains an array of pitot-static fittings for pitot tubing. Each kit consists of a clear, impact-resistant resin case with a series of nylon fittings, plugs, connectors, elbows, and tees. This clear, organized kit makes it easy to view quantities and simplifies the reordering/refilling process.
$479.95
#10 PIDG Ring Terminal | 22 – 16 AWG Wire Size (100pcs)
PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of a nylon or PVC insulated body, plus a metal sleeve that clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.
$19.95Trig TT21 & TT22 Wiring Harness & TN72 Connection – 39″
Trig’s TT21 & TT22 wiring harness with TN72 connections is a 39-inch short cable harness that connects a TT21 or TT22 remote mounted transponder unit to a panel mounted TC20 control head as well as a TN72 GPS Receiver.
$199.00
PIDG Butt Splice | 24 – 20 AWG Wire Size (50pcs)
PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of a nylon or PVC insulated body, plus a metal sleeve that clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.
$23.50
AFM8 Crimp Tool Kit
The Daniels AFM8 crimp tool is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems. The AFM8 Kit is organized in a case with a foam insert to hold 3 positioners, 2 plastic insert/removal tools, and the AFM8 crimp tool.
$834.95AFM8 Crimp Tool Kit
$834.95
Honeywell Pressure Switch – 15 PSI
Honeywell pressure switch sense a change in the pressure, opening or closing an electrical circuit when the designated set point is reached.
$84.95
