No products in the cart.
LiSO2 replacement lithium battery pack for Artex 406 MHZ ELT 1000. This battery pack consists of two “D” size Lithium Sulfur Dioxide cells and is rated for 6 years.$279.95
Artex ELT 345 transmits on 406 MHz and 121.5 MHz frequencies and can provide position accuracy with an optional GPS input thanks to the built-in GPS navigational interface.$874.95
The Digiflo-L is a Digital Fuel Management System designed to provide complete fuel management information under real flight conditions without any manual entry of data (after entry of the initial fuel on board information). Digiflo-L is connected to the engine fuel flow transducer for fuel flow information and to the Loran-C or GPS receiver serial port for navigation data (ground speed, distance, and estimated time en route).$2,175.00
Artex C406 / B406 ELT replacement battery pack is suitable for all variants of C406 and B406 ELTs, including the HM models. Rated for five years. Meets ETSO 2C126 and TSO C126 certifications.$617.95
Artex ELT 345 transmits on 406 MHz and 121.5 MHz frequencies and can provide position accuracy with an optional GPS input thanks to the built-in GPS navigational interface. GPS data is embedded from the first emergency transmission and provides Search and Rescue personnel with the aircraft location, within 100 meters, in less than a minute.$917.50
The Artex G406-4 Replacement Battery consists of four “D” size lithium manganese dioxide cells connected in series. In an effort to increase the safety of the battery pack, a number of features were designed into the battery pack. To prevent the cells from being charged, diodes are connected across each cell, and fuses are connected to the output.$627.50
Artex ELT 1000 Remote Switch was designed to accommodate 2 wire installations used on the outdated 121.5 MHz ELTs to reduce installation costs. The 3-position switch is always positioned in the default ARMED mode but can also be used for testing your ELT or activating your ELT from the cockpit.$154.75$154.75