-
Artex ME406 ELT Piezo Buzzer
Piezoelectric test buzzer designed for use with the Artex ME406 ELT. Provides an audible alert if the ELT is activated during a rough flight or landing.
$72.95Artex ME406 ELT Piezo Buzzer
$72.95 -
Artex ME406 Series ELT Install Kit | 455-7423
Artex ME406 Series ELT Installation Kit
$77.25 -
Honeywell Pressure Switch – 15 PSI
Honeywell pressure switch sense a change in the pressure, opening or closing an electrical circuit when the designated set point is reached.
$84.95 -
Comant CI 101 Transponder Antenna | 1030-1090 MHz
Comant’s CI 101 transponder antenna is a top-loaded stub, monopole, transponder antenna with a mechanically captivated radiator machined from solid brass for impact resistance. Contact power is made from beryllium copper, and metallic parts are plated with bright nickel for corrosion protection.
$124.95 -
Artex ME406 Mounting Tray
Mounting tray for use with Artex ME406 ELTs. The tray comes with a metal strap to comply with TSO C126b.
$137.95Artex ME406 Mounting Tray
$137.95 -
Artex ELT Whip Antenna 110-324
Artex 110-324 is a dual-band black whip antenna with an inductor designed for speeds up to 200 knots TAS.
$139.95Artex ELT Whip Antenna 110-324
$139.95 -
ME406 ELT Remote Switch
Remote ELT switch for the Artex ME406 Emergency Locator Transmitter.
$147.95ME406 ELT Remote Switch
$147.95 -
Artex ELT 1000 Remote Switch
Artex ELT 1000 Remote Switch was designed to accommodate 2 wire installations used on the outdated 121.5 MHz ELTs to reduce installation costs. The 3-position switch is always positioned in the default ARMED mode but can also be used for testing your ELT or activating your ELT from the cockpit.
$154.75Artex ELT 1000 Remote Switch
$154.75 -
Comant VOR & Glide Slope Diplexer | CI-507
Comant’s CI-507 VOR/GS Diplexer allows the operation of one VOR receiver and one glideslope receiver from one VOR/GS antenna.
$194.95 -
Comant DME / Transponder Antenna | CI 105 | 960-1220 MHz
The CI 105 is broadband and rugged antenna designed for DME or transponder use. The antenna assembly is encased in a glass-reinforced polyester molded shell and has a standard two stud mounting configuration.
$214.50 -
Artex Teflon Coax Cable | BNC
Artex 611 series is a Teflon-coated coaxial cable specifically designed to connect an antenna to a 406MHz frequency ELTs. Its inner conductor consists of a solid silver-coated, copper-clad steel wire, while the outer conductor features a double-braided, silver-coated construction.
$227.50Artex Teflon Coax Cable | BNC
$227.50 -
Artex ELT 200 Replacement Battery | 2 Year, Alkaline
ELT 200 alkaline replacement battery pack for Artex ELT 200 system. Rated for 2 years.
$227.95 -
Comant Marker Beacon Antenna | CI-102
Comant CI-102 antenna is designed for use with the modern, high-sensitivity marker beacon receivers. Small and lightweight, featuring 4-hole internal mounting for simple installation. The antenna assembly is enclosed in an injection-molded radome which is impervious to the tough environments typical of the underside of an aircraft. Skydrol and rain erosion resistant. DC grounded to minimize accumulation of precipitation static.
$227.95 -
Comant VHF Comm Antenna | CI 121 | 118-137 MHz
Similar to CI 109, Comant CI-121 VHF Antenna is smaller in diameter and lighter at only 0.5 pounds. Features a tapered glass laminate housing and die-cast aluminum base. Offers standard mounting and appearance to many Cessna communication antennas.
$229.75 -
Comant Dual VOR & Glide Slope Diplexer | CI-1125
Comant CI-1125 Dual VOR/dual glide slope diplexer features diplexer circuitry in a small die-stamped housing for high reliability. Provides operation between two VOR receivers and two glide slope receivers from the same VOR/glide slope antenna.
$247.95