-
Artex ME406 ELT Piezo Buzzer
Piezoelectric test buzzer designed for use with the Artex ME406 ELT. Provides an audible alert if the ELT is activated during a rough flight or landing.
$72.95Artex ME406 ELT Piezo Buzzer
$72.95 -
Artex ME406 Series ELT Install Kit | 455-7423
Artex ME406 Series ELT Installation Kit
$77.25 -
ACK ELT E-04 Whip Antenna
ACK’s E-04.8 is a 406/121.5 MHz ELT whip antenna designed for the E-04 406 Emergency Locator Transmitter. It features a monopole, dual-frequency design, and can operate up to 260 knots.
$104.95ACK ELT E-04 Whip Antenna
$104.95 -
Comant CI 101 Transponder Antenna | 1030-1090 MHz
Comant’s CI 101 transponder antenna is a top-loaded stub, monopole, transponder antenna with a mechanically captivated radiator machined from solid brass for impact resistance. Contact power is made from beryllium copper, and metallic parts are plated with bright nickel for corrosion protection.
$124.95 -
Artex ME406 Mounting Tray
Mounting tray for use with Artex ME406 ELTs. The tray comes with a metal strap to comply with TSO C126b.
$137.95Artex ME406 Mounting Tray
$137.95 -
Artex ELT Whip Antenna 110-324
Artex 110-324 is a dual-band black whip antenna with an inductor designed for speeds up to 200 knots TAS.
$139.95Artex ELT Whip Antenna 110-324
$139.95 -
ME406 ELT Remote Switch
Remote ELT switch for the Artex ME406 Emergency Locator Transmitter.
$147.95ME406 ELT Remote Switch
$147.95 -
Artex ELT 1000 Remote Switch
Artex ELT 1000 Remote Switch was designed to accommodate 2 wire installations used on the outdated 121.5 MHz ELTs to reduce installation costs. The 3-position switch is always positioned in the default ARMED mode but can also be used for testing your ELT or activating your ELT from the cockpit.
$154.75Artex ELT 1000 Remote Switch
$154.75 -
Comant VOR & Glide Slope Diplexer | CI-507
Comant’s CI-507 VOR/GS Diplexer allows the operation of one VOR receiver and one glideslope receiver from one VOR/GS antenna.
$194.95 -
Comant DME / Transponder Antenna | CI 105 | 960-1220 MHz
The CI 105 is broadband and rugged antenna designed for DME or transponder use. The antenna assembly is encased in a glass-reinforced polyester molded shell and has a standard two stud mounting configuration.
$214.50 -
Artex Teflon Coax Cable | BNC
Artex 611 series is a Teflon-coated coaxial cable specifically designed to connect an antenna to a 406MHz frequency ELTs. Its inner conductor consists of a solid silver-coated, copper-clad steel wire, while the outer conductor features a double-braided, silver-coated construction.
$227.50Artex Teflon Coax Cable | BNC
$227.50 -
Artex ELT 200 Replacement Battery | 2 Year, Alkaline
ELT 200 alkaline replacement battery pack for Artex ELT 200 system. Rated for 2 years.
$227.95 -
Comant Marker Beacon Antenna | CI-102
Comant CI-102 antenna is designed for use with the modern, high-sensitivity marker beacon receivers. Small and lightweight, featuring 4-hole internal mounting for simple installation. The antenna assembly is enclosed in an injection-molded radome which is impervious to the tough environments typical of the underside of an aircraft. Skydrol and rain erosion resistant. DC grounded to minimize accumulation of precipitation static.
$227.95 -
Comant VHF Comm Antenna | CI 121 | 118-137 MHz
Similar to CI 109, Comant CI-121 VHF Antenna is smaller in diameter and lighter at only 0.5 pounds. Features a tapered glass laminate housing and die-cast aluminum base. Offers standard mounting and appearance to many Cessna communication antennas.
$229.75 -
ACK A-30.5 Altitude Encoder | Gray Code, TSO’d
ACK A-30.5 Altitude Encoder, equipped with advanced solid-state electronics, offers exceptional reliability. With a swift and effortless installation process that typically takes less than an hour, it is designed to be compatible with most of the transponders currently in operation, reporting altitudes up to 30,750 ft.
$244.75