No products in the cart.
Flitz Premium Microfiber Polishing Cloth
Super-Premium 16 x 16 inch Gray Microfiber Polishing Cloth. Clean faster, easier, and cheaper for use on any surface. Removes Dust, Dirt, Fingerprints, Grease and Oil, Polish, Waxes, Bugs and Tar, Nicotine film.
$3.55ACK ELT E-04 Whip Antenna
ACK’s E-04.8 is a 406/121.5 MHz ELT whip antenna designed for the E-04 406 Emergency Locator Transmitter. It features a monopole, dual-frequency design, and can operate up to 260 knots.
$104.95ACK ELT E-04 Whip Antenna
$104.95DRK38 Removal tool
The Daniels DRK38 is a removal tool for D-Subminiature coaxial contacts.
$117.95DRK38 Removal tool
$117.95Comant CI 101 Transponder Antenna | 1030-1090 MHz
Comant’s CI 101 transponder antenna is a top-loaded stub, monopole, transponder antenna with a mechanically captivated radiator machined from solid brass for impact resistance. Contact power is made from beryllium copper, and metallic parts are plated with bright nickel for corrosion protection.
$124.95Comant DME / Transponder Antenna | CI 105 | 960-1220 MHz
The CI 105 is broadband and rugged antenna designed for DME or transponder use. The antenna assembly is encased in a glass-reinforced polyester molded shell and has a standard two stud mounting configuration.
$189.75Comant VOR & Glide Slope Diplexer | CI-507
Comant’s CI-507 VOR/GS Diplexer allows the operation of one VOR receiver and one glideslope receiver from one VOR/GS antenna.
$194.95Comant Marker Beacon Antenna | CI-102
Comant CI-102 antenna is designed for use with the modern, high-sensitivity marker beacon receivers. Small and lightweight, featuring 4-hole internal mounting for simple installation. The antenna assembly is enclosed in an injection-molded radome which is impervious to the tough environments typical of the underside of an aircraft. Skydrol and rain erosion resistant. DC grounded to minimize accumulation of precipitation static.
$227.95Comant VHF Comm Antenna | CI 121 | 118-137 MHz
Similar to CI 109, Comant CI-121 VHF Antenna is smaller in diameter and lighter at only 0.5 pounds. Features a tapered glass laminate housing and die-cast aluminum base. Offers standard mounting and appearance to many Cessna communication antennas.
$229.75ACK A-30.5 Altitude Encoder | Gray Code, TSO’d
ACK A-30.5 Altitude Encoder, equipped with advanced solid-state electronics, offers exceptional reliability. With a swift and effortless installation process that typically takes less than an hour, it is designed to be compatible with most of the transponders currently in operation, reporting altitudes up to 30,750 ft.
$244.75GMT232 Hand Crimp Tool
The Daniels GMT232 Hand Crimp Tool is designed to crimp low profile environmental splices.
$247.50GMT232 Hand Crimp Tool
$247.50Comant Dual VOR & Glide Slope Diplexer | CI-1125
Comant CI-1125 Dual VOR/dual glide slope diplexer features diplexer circuitry in a small die-stamped housing for high reliability. Provides operation between two VOR receivers and two glide slope receivers from the same VOR/glide slope antenna.
$247.95ACK A-30.9 (Mod 9) Encoder | Two RS 232 Outputs
The ACK A-30.9 encoder works with all modern mode A/C and mode S transponders.
$249.00HX4 Die Set – M22520/5-100 (Y501)
The DMC HX4 Crimp tool features a system of interchangeable dies that eliminates the need for separate fixed die crimp tools for each and every different application. Many maintenance and manufacturing concerns have standardized on this model, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single-purpose tools.
$252.95