-
RAMI AV-10 VHF Antenna
RAMI AV-10 VHF communications antenna designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base.
$189.95RAMI AV-10 VHF Antenna
$189.95 -
HX4 Crimp Tool – M22520/5-01
Qualified to AS22520/5, the DMC HX4 crimp tool features a system of interchangeable dies (accommodates “Y” series dies) which eliminates the need for separate fixed die crimp tools for each and every different application. Many maintenance and production organizations have standardized on one of these models, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single purpose, dedicated tools.
$496.95HX4 Crimp Tool – M22520/5-01
$496.95 -
GMT232 Hand Crimp Tool
The Daniels GMT232 Hand Crimp Tool is designed to crimp low profile environmental splices.
$247.50GMT232 Hand Crimp Tool
$247.50 -
RAMI AV-529 VHF Antenna
RAMI’s AV-529 is a certified antenna designed for broadband communications (118-137 MHz). It has a die-cast aluminum base and a uniquely designed radiator encapsulated in a fiberglass whip. The antenna is supplied with a weather-sealing gasket and mounting hardware.
$197.95RAMI AV-529 VHF Antenna
$197.95 -
RAMI AV-74-1 DME Transponder Antenna | 960-1220 MHz
RAMI AV-74 DME Transponder Antenna is a broadband blade type antenna for transponder or DME application. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware.
$162.95 -
RAMI AV-801 WAAS GPS Antenna
RAMI’s AV-801 GPS antenna is designed specifically to meet FAA TSO-C190 specifications. Qualification testing includes meeting the requirements of RTCA DO-301 and DO-160G. The mounting footprint matches the standard ARINC found on many general aviation aircraft up to and including business jets.
$317.95RAMI AV-801 WAAS GPS Antenna
$317.95 -
MY-CO USB Carbon Monoxide Detector
The MY-CO USB Carbon Monoxide Detector is flight safety in a compact, lightweight device form. With its intelligent design, it utilizes a USB power source to provide continuous monitoring of carbon monoxide (CO) levels during travel. This smart feature ensures reliable CO detection throughout the flight.
$127.95 -
AFM8 Crimp Tool Kit
The Daniels AFM8 crimp tool is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems. The AFM8 Kit is organized in a case with a foam insert to hold 3 positioners, 2 plastic insert/removal tools, and the AFM8 crimp tool.
$834.95AFM8 Crimp Tool Kit
$834.95 -
Shadin Digiflo-L Digital Fuel Management System | Twin Engine
The Digiflo-L is a Digital Fuel Management System designed to provide complete fuel management information under real flight conditions without any manual entry of data (after entry of the initial fuel on board information). Digiflo-L is connected to the engine fuel flow transducer for fuel flow information and to the Loran-C or GPS receiver serial port for navigation data (ground speed, distance, and estimated time en route).
$2,175.00 -
-
RAMI AV-300 ELT Rod Antenna
The AV-300 ELT antenna is designed to be paired with a 406 MHz ELT for General Aviation. It’s a passive tri-frequency rod antenna made of fiberglass, suited for aircraft operating at speeds up to 350 knots. This antenna adheres to the DO-160G, Section 8, Category U standards for vibration resilience and is approved for use on helicopters, irrespective of their rotor frequencies.
$289.75RAMI AV-300 ELT Rod Antenna
$289.75 -
RAMI AV-585 Antenna Diplexer/Splitter
RAMI’s AV-585 is a diplexer/splitter providing two VOR/ LOC and two GS outputs from one VOR/LOC/GC antenna. It is a direct replacement for the Comant’s CI-1125.
$178.95 -
Shading Transducer Install Kit (680501A)
Shadin Avionics’s Fuel flow transducer kit. Includes 680501A transducer and 90-degree elbow fittings.$795.00$1,000.00Shading Transducer Install Kit (680501A)
$795.00$1,000.00 -
Shadin Digiflo-L Harness – Twin Engine
Shadin’s pre-wired, fully shielded, high-quality harness for use with Digiflo-L for twin-engine aircraft. 20 feet long.
$244.95 -
$524.00
$566.00Shadin 681201-1 OAT Probe Assembly Kit
$524.00$566.00
