-
ACK E-04 ELT Series Replacement Battery | 5-year, Lithium
Lithium (LiMnO2) battery replacement for use with ACK E-04 Series 406 MHz ELT. Rated for 5 years.
$264.95 -
ACK E-04 ELT Complete System Kit
ACK’s E-04 ELT is a direct replacement for the more than 62,000 ACK E-01 ELT’s models on the market today. The E-04 fits directly into the current E-01 mounting trays and uses the same remote control panel indicator. The E-04 external antenna will utilize your current antenna mounting and wiring installations.
$837.75ACK E-04 ELT Complete System Kit
$837.75 -
ACK ELT E-04 Whip Antenna
ACK’s E-04.8 is a 406/121.5 MHz ELT whip antenna designed for the E-04 406 Emergency Locator Transmitter. It features a monopole, dual-frequency design, and can operate up to 260 knots.
$104.95ACK ELT E-04 Whip Antenna
$104.95 -
PIDG Butt Splice | 24 – 20 AWG Wire Size (50pcs)
PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of a nylon or PVC insulated body, plus a metal sleeve that clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.
$23.50 -
ACK A-30.9 (Mod 9) Encoder | Two RS 232 Outputs
The ACK A-30.9 encoder works with all modern mode A/C and mode S transponders.
$249.00 -
Shadin Digiflo-L Digital Fuel Management System | Twin Engine
The Digiflo-L is a Digital Fuel Management System designed to provide complete fuel management information under real flight conditions without any manual entry of data (after entry of the initial fuel on board information). Digiflo-L is connected to the engine fuel flow transducer for fuel flow information and to the Loran-C or GPS receiver serial port for navigation data (ground speed, distance, and estimated time en route).
$2,175.00 -
-
#10 PIDG Ring Terminal | 22 – 16 AWG Wire Size (100pcs)
PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of a nylon or PVC insulated body, plus a metal sleeve that clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.
$19.95 -
ACK E-04 ELT Retrofit Kit
ACK E-04 ELT Retrofit Kit is a direct replacement for the model E-01 ELTs and transmits on 406 as well as 121.5 MHz. For increased accuracy, it can also accept NEMA 0183 GPS position data from Garmin and Bendix/King GPS. The E-04 external antenna will utilize a current antenna mounting and wiring installation.
$824.95ACK E-04 ELT Retrofit Kit
$824.95 -
Shading Transducer Install Kit (680501A)
Shadin Avionics’s Fuel flow transducer kit. Includes 680501A transducer and 90-degree elbow fittings.$795.00$1,000.00Shading Transducer Install Kit (680501A)
$795.00$1,000.00 -
W31 Series Circuit Breaker | 7.5 Amp Rating, Toggle Actuator
The W31 series are single pole, thermal circuit breakers with toggle actuator and series trip function. They are UL 1077 Recognized as Supplementary Protectors.
$68.45 -
ACK A-30.5 Altitude Encoder | Gray Code, TSO’d
ACK A-30.5 Altitude Encoder, equipped with advanced solid-state electronics, offers exceptional reliability. With a swift and effortless installation process that typically takes less than an hour, it is designed to be compatible with most of the transponders currently in operation, reporting altitudes up to 30,750 ft.
$244.75 -
HD 20 Pin Contact | 24 – 20 AWG (100pcs)
TE Connectivity’s size 20 HD contact pin (Part No. 205089-1) is a crimp, snap-in contact that is constructed with a gold-plated copper alloy. Meets Mil-Specifications M39029/64-369.
$43.00 -
Shadin Digiflo-L Harness – Twin Engine
Shadin’s pre-wired, fully shielded, high-quality harness for use with Digiflo-L for twin-engine aircraft. 20 feet long.
$244.95 -
$524.00
$566.00Shadin 681201-1 OAT Probe Assembly Kit
$524.00$566.00
