-
Datcom Hour Meter 873 | 12-24 VDC
Datcom Hour Meter # 873 became standard equipment in most production aircraft. Datcom Hour Meter mounts in a standard 2-1/4″ instrument hole and operates on any DC voltage between 12 and 24 volts. The running indicator indexes every 6 seconds.
$79.25 -
PIDG Butt Splice | 24 – 20 AWG Wire Size (50pcs)
PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of a nylon or PVC insulated body, plus a metal sleeve that clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.
$23.50 -
David Clark H10-13S Stereo Headset | Dual Plug
David Clark H10-13S Passive noise-attenuating headsets designed for fixed-wing aircraft provide extremely reliable performance and communication clarity. Proven, reliable performance and remarkable comfort have made the H10-13 series a top choice for pilots.
$349.95 -
Kannad 406 Series ELT Replacement Battery
The replacement battery pack for McMurdo Kannad 406 Series ELTs. The lithium (LiMn02) battery pack is rated for six years and includes the installation kit.
$1,174.95 -
Shadin Digiflo-L Digital Fuel Management System | Twin Engine
The Digiflo-L is a Digital Fuel Management System designed to provide complete fuel management information under real flight conditions without any manual entry of data (after entry of the initial fuel on board information). Digiflo-L is connected to the engine fuel flow transducer for fuel flow information and to the Loran-C or GPS receiver serial port for navigation data (ground speed, distance, and estimated time en route).
$2,175.00 -
#10 PIDG Ring Terminal | 22 – 16 AWG Wire Size (100pcs)
PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of a nylon or PVC insulated body, plus a metal sleeve that clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.
$19.95 -
Shading Transducer Install Kit (680501A)
Shadin Avionics’s Fuel flow transducer kit. Includes 680501A transducer and 90-degree elbow fittings.$795.00$1,000.00Shading Transducer Install Kit (680501A)
$795.00$1,000.00 -
W31 Series Circuit Breaker | 7.5 Amp Rating, Toggle Actuator
The W31 series are single pole, thermal circuit breakers with toggle actuator and series trip function. They are UL 1077 Recognized as Supplementary Protectors.
$68.45 -
HD 20 Pin Contact | 24 – 20 AWG (100pcs)
TE Connectivity’s size 20 HD contact pin (Part No. 205089-1) is a crimp, snap-in contact that is constructed with a gold-plated copper alloy. Meets Mil-Specifications M39029/64-369.
$43.00 -
Shadin Digiflo-L Harness – Twin Engine
Shadin’s pre-wired, fully shielded, high-quality harness for use with Digiflo-L for twin-engine aircraft. 20 feet long.
$244.95 -
$524.00
$566.00Shadin 681201-1 OAT Probe Assembly Kit
$524.00$566.00 -
Kannad Integra 406 GPS AF ELT – Unit & Battery
The Kannad Integra 406 AF ELT with an internal 406 MHz antenna is a highly efficient option for individual or fleet operators looking to equip or retrofit their aircraft or helicopter with a 406 MHz ELT with GPS capabilities.
$1,225.00 -
Kannad ELT Universal Compact Mounting Tray | 1 Strap
Kannad universal ELT compact mounting tray is compatible with most 121.5 MHz ELT beacons on the market. This bracket saves installation time and costs as no drilling or cable change is required.
$114.95 -
Kannad ELT Universal Mounting Tray | 1 Strap
Kannad ELT universal mounting tray is designed to fit Kannad 406 AP, AP-H, AF, AF-H, automatic three-frequency ELTs. Also suitable for Kannad Navigation Interface unit.
$147.95 -
HX4 Die Set – M22520/5-101 (Y527)
The DMC HX4 Crimp tool features a system of interchangeable dies that eliminates the need for separate fixed die crimp tools for each and every different application. Many maintenance and manufacturing concerns have standardized on this model, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single-purpose tools.
$284.95
