-
Comant ADS-B Antenna CI 105-17-L
Comant’s CI 105-17-L is a top of the line ADS-B performance antenna capable of both IN and OUT processing. The single connector blade antenna can be used for ADS-B, TIS-B, UAT, DME or ATCRBS Transponder, plus Mode S.
$565.95Comant ADS-B Antenna CI 105-17-L
$565.95 -
DRK38 Removal tool
The Daniels DRK38 is a removal tool for D-Subminiature coaxial contacts.
$117.95DRK38 Removal tool
$117.95 -
GMT232 Hand Crimp Tool
The Daniels GMT232 Hand Crimp Tool is designed to crimp low profile environmental splices.
$247.50GMT232 Hand Crimp Tool
$247.50 -
HX4 Crimp Tool – M22520/5-01
Qualified to AS22520/5, the DMC HX4 crimp tool features a system of interchangeable dies (accommodates “Y” series dies) which eliminates the need for separate fixed die crimp tools for each and every different application. Many maintenance and production organizations have standardized on one of these models, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single purpose, dedicated tools.
$496.95HX4 Crimp Tool – M22520/5-01
$496.95 -
Airpath C2300 Magnetic Compass | 24V, TSO’d, Lighted
Airpath C2300-L4-24-B Magnetic Compass was specifically designed for aircraft panel-mount installation and meets FAA TSO-C7c requirements. Black-colored Airpath C2300-L4-24-B model operates on 24 VDC and features white internal lighting.
$317.75 -
AFM8 Crimp Tool Kit
The Daniels AFM8 crimp tool is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems. The AFM8 Kit is organized in a case with a foam insert to hold 3 positioners, 2 plastic insert/removal tools, and the AFM8 crimp tool.
$834.95AFM8 Crimp Tool Kit
$834.95 -
Shadin Digiflo-L Digital Fuel Management System | Twin Engine
The Digiflo-L is a Digital Fuel Management System designed to provide complete fuel management information under real flight conditions without any manual entry of data (after entry of the initial fuel on board information). Digiflo-L is connected to the engine fuel flow transducer for fuel flow information and to the Loran-C or GPS receiver serial port for navigation data (ground speed, distance, and estimated time en route).
$2,175.00 -
ADS-B Wire Protection Install Kit | M22529/2-2
Device Technologies ADS-B installation kit facilitates the ADS-B upgrade for aircraft owners and MRO service centers alike. This install kit protects critical wires and reduces AOG time due to a quick installation.
$167.95 -
Shading Transducer Install Kit (680501A)
Shadin Avionics’s Fuel flow transducer kit. Includes 680501A transducer and 90-degree elbow fittings.$795.00$1,000.00Shading Transducer Install Kit (680501A)
$795.00$1,000.00 -
AFM8 Miniature Adjustable Indent Crimp Tool
The Daniels AFM8 crimp tool is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems.
$469.95 -
Shadin Digiflo-L Harness – Twin Engine
Shadin’s pre-wired, fully shielded, high-quality harness for use with Digiflo-L for twin-engine aircraft. 20 feet long.
$244.95 -
$524.00
$566.00Shadin 681201-1 OAT Probe Assembly Kit
$524.00$566.00 -
Universal Coax Adapter Kit
Universal Coax Adapter Kit includes two male and two female connectors for each of the six types, allowing for the creation of any adapter on the spot within seconds. Just attach any combination of the 24 connectors to one of the 6 Universal Interfaces by screwing them together. There is no need for soldering or crimping, enabling the connectors to be reused in various combinations.
$197.75Universal Coax Adapter Kit
$197.75 -
HX4 Die Set – M22520/5-100 (Y501)
The DMC HX4 Crimp tool features a system of interchangeable dies that eliminates the need for separate fixed die crimp tools for each and every different application. Many maintenance and manufacturing concerns have standardized on this model, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single-purpose tools.
$252.95
