-
-
Sandia STX 165 Adapter Plate
Sandia STX-165 adaptor plate allows the STX-165 transponder to be mounted in a standard 3-inch instrument hole. $87.95Sandia STX 165 Adapter Plate
$87.95 -
Comant CI 101 Transponder Antenna | 1030-1090 MHz
Comant’s CI 101 transponder antenna is a top-loaded stub, monopole, transponder antenna with a mechanically captivated radiator machined from solid brass for impact resistance. Contact power is made from beryllium copper, and metallic parts are plated with bright nickel for corrosion protection.
$124.95 -
Comant VOR & Glide Slope Diplexer | CI-507
Comant’s CI-507 VOR/GS Diplexer allows the operation of one VOR receiver and one glideslope receiver from one VOR/GS antenna.
$194.95 -
Comant DME / Transponder Antenna | CI 105 | 960-1220 MHz
The CI 105 is broadband and rugged antenna designed for DME or transponder use. The antenna assembly is encased in a glass-reinforced polyester molded shell and has a standard two stud mounting configuration.
$214.50 -
Sandia SRU 1 Single Module Enclosure | For MARC70 Interface
Sandia’s SRU 1 is a single card enclosure that accepts any MARC70 interface module.
$227.00 -
Comant Marker Beacon Antenna | CI-102
Comant CI-102 antenna is designed for use with the modern, high-sensitivity marker beacon receivers. Small and lightweight, featuring 4-hole internal mounting for simple installation. The antenna assembly is enclosed in an injection-molded radome which is impervious to the tough environments typical of the underside of an aircraft. Skydrol and rain erosion resistant. DC grounded to minimize accumulation of precipitation static.
$227.95 -
Comant VHF Comm Antenna | CI 121 | 118-137 MHz
Similar to CI 109, Comant CI-121 VHF Antenna is smaller in diameter and lighter at only 0.5 pounds. Features a tapered glass laminate housing and die-cast aluminum base. Offers standard mounting and appearance to many Cessna communication antennas.
$229.75 -
Comant Dual VOR & Glide Slope Diplexer | CI-1125
Comant CI-1125 Dual VOR/dual glide slope diplexer features diplexer circuitry in a small die-stamped housing for high reliability. Provides operation between two VOR receivers and two glide slope receivers from the same VOR/glide slope antenna.
$247.95 -
Sandia SAFE 128 Cooling Fan | 22-31 VDC, Axial, Fault Detection
Sandia SAFE 128 Cooling Fan is an axial fan specifically designed to attach to the cooling port of avionics units directly. This innovative fan offers a nominal cooling air capacity of 20 CFM (no load). It operates efficiently, ensuring proper cooling for the avionics equipment.
$274.95 -
L3Harris DM H24-1 Coupler | Dual GS, BNC Connector
L3Harris DM H24-1 antenna coupler is designed to couple multiple receiver systems to a single antenna with minimum insertion loss.
$289.75 -
Sandia OAT Probe for STX-165 Transponder
This Sandia Aerospace’s Outside Air Temperature probe provides additional capability including density altitude and OAT displays and icing alerts for the STX 165 transponder.
$324.95 -
Comant VHF Comm Antenna | CI 109 | 118-137 MHz
Comant CI-109 VHF Antenna incorporates an aerodynamically shaped mounting base and radiator housing that matches the styling of the communication antennas used on the 1968-72 single-engine Cessnas.
$344.95 -
L3Harris DM H23-1 Triplexer | Dual VOR, Single GS, BNC Connector
This H23 antenna coupler (PN DM H23-1) supports dual VOR and single GS operations and features BNC connectors.
$359.95 -
Comant VHF Bent Whip Antenna CI 292-2
Comant’s CI-292-2 VHF antenna is identical to the CI-292-1 except that it provides a stainless steel bent-whip radiator which makes it ideal for helicopters and bottom mounting underneath fixed-wing aircraft. The CI-292-2 has been re-tested and upgraded to the new RTCA DO-160D environmental requirements and offers the 118 to 137 MHz frequency associated with DO-186A MOPS.
$364.95