-
ACK E-04 ELT Series Replacement Battery | 5-year, Lithium
Lithium (LiMnO2) battery replacement for use with ACK E-04 Series 406 MHz ELT. Rated for 5 years.
$264.95 -
MERL BP-1010 ELT Battery Pack | 2yr Replacement Battery For Narco ELT 10
MERL BP-1010 ELT Battery Pack is a TSO-approved replacement battery for Narco ELT 10. Rated for two years.
$119.75 -
ACK E-04 ELT Complete System Kit
ACK’s E-04 ELT is a direct replacement for the more than 62,000 ACK E-01 ELT’s models on the market today. The E-04 fits directly into the current E-01 mounting trays and uses the same remote control panel indicator. The E-04 external antenna will utilize your current antenna mounting and wiring installations.
$837.75ACK E-04 ELT Complete System Kit
$837.75 -
ACK ELT E-04 Whip Antenna
ACK’s E-04.8 is a 406/121.5 MHz ELT whip antenna designed for the E-04 406 Emergency Locator Transmitter. It features a monopole, dual-frequency design, and can operate up to 260 knots.
$104.95ACK ELT E-04 Whip Antenna
$104.95 -
ACK A-30.9 (Mod 9) Encoder | Two RS 232 Outputs
The ACK A-30.9 encoder works with all modern mode A/C and mode S transponders.
$249.00 -
Shadin Digiflo-L Digital Fuel Management System | Twin Engine
The Digiflo-L is a Digital Fuel Management System designed to provide complete fuel management information under real flight conditions without any manual entry of data (after entry of the initial fuel on board information). Digiflo-L is connected to the engine fuel flow transducer for fuel flow information and to the Loran-C or GPS receiver serial port for navigation data (ground speed, distance, and estimated time en route).
$2,175.00 -
Honeywell Pressure Switch – 15 PSI
Honeywell pressure switch sense a change in the pressure, opening or closing an electrical circuit when the designated set point is reached.
$84.95 -
ACK E-04 ELT Retrofit Kit
ACK E-04 ELT Retrofit Kit is a direct replacement for the model E-01 ELTs and transmits on 406 as well as 121.5 MHz. For increased accuracy, it can also accept NEMA 0183 GPS position data from Garmin and Bendix/King GPS. The E-04 external antenna will utilize a current antenna mounting and wiring installation.
$824.95ACK E-04 ELT Retrofit Kit
$824.95 -
Shading Transducer Install Kit (680501A)
Shadin Avionics’s Fuel flow transducer kit. Includes 680501A transducer and 90-degree elbow fittings.$795.00$1,000.00Shading Transducer Install Kit (680501A)
$795.00$1,000.00 -
Shadin Digiflo-L Harness – Twin Engine
Shadin’s pre-wired, fully shielded, high-quality harness for use with Digiflo-L for twin-engine aircraft. 20 feet long.
$244.95 -
$524.00
$566.00Shadin 681201-1 OAT Probe Assembly Kit
$524.00$566.00 -
ACK A-30.5 Altitude Encoder | Gray Code, TSO’d
ACK A-30.5 Altitude Encoder, equipped with advanced solid-state electronics, offers exceptional reliability. With a swift and effortless installation process that typically takes less than an hour, it is designed to be compatible with most of the transponders currently in operation, reporting altitudes up to 30,750 ft.
$244.75 -
Synchro Heading Input Converter | ARINC 429
The converter accepts the Magnetic Heading (ARINC 407 3-wire Synchro Data Inputs) and converts to A-429 low-speed output label 320.
$2,695.00 -
Artex Teflon Coax Cable | BNC to TPS, 6ft
The Artex 611-9010 Coaxial Cable is part of the 611 series, designed specifically for high-performance connections between a 406 MHz Emergency Locator Transmitter (ELT) and its external antenna. Engineered for general and business aviation applications, this 6-foot coax cable ensures reliable signal integrity when it matters most.Constructed with a solid silver-coated, copper-clad steel inner conductor and a double-braided silver-coated outer conductor, the cable provides excellent shielding and minimal signal loss. Its Teflon jacket enhances durability and thermal resistance in demanding aviation environments. The 611-9010 cable comes pre-terminated with a BNC male connector on one end and a TPS connector on the other$697.00 -
Shadin RS232 to RS442 / RS422 to RS232 Converter
A factory new Shadin RS232 to RS442 / RS422 to RS232 Converter is designed to translate serial data from either RS-232 or RS-422 format into the alternate format. This versatile converter can process any serial data format and functions as a bi-directional level translator, featuring two separate conversion channels for simultaneous data conversion.
$1,174.95