-
ACK E-04 ELT Series Replacement Battery | 5-year, Lithium
Lithium (LiMnO2) battery replacement for use with ACK E-04 Series 406 MHz ELT. Rated for 5 years.
$264.95 -
ACK E-04 ELT Complete System Kit
ACK’s E-04 ELT is a direct replacement for the more than 62,000 ACK E-01 ELT’s models on the market today. The E-04 fits directly into the current E-01 mounting trays and uses the same remote control panel indicator. The E-04 external antenna will utilize your current antenna mounting and wiring installations.
$824.75ACK E-04 ELT Complete System Kit
$824.75 -
HX4 Crimp Tool – M22520/5-01
Qualified to AS22520/5, the DMC HX4 crimp tool features a system of interchangeable dies (accommodates “Y” series dies) which eliminates the need for separate fixed die crimp tools for each and every different application. Many maintenance and production organizations have standardized on one of these models, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single purpose, dedicated tools.
$496.95HX4 Crimp Tool – M22520/5-01
$496.95 -
GMT232 Hand Crimp Tool
The Daniels GMT232 Hand Crimp Tool is designed to crimp low profile environmental splices.
$247.50GMT232 Hand Crimp Tool
$247.50 -
ACK ELT E-04 Whip Antenna
ACK’s E-04.8 is a 406/121.5 MHz ELT whip antenna designed for the E-04 406 Emergency Locator Transmitter. It features a monopole, dual-frequency design, and can operate up to 260 knots.
$104.95ACK ELT E-04 Whip Antenna
$104.95 -
ACK A-30.9 (Mod 9) Encoder | Two RS 232 Outputs
The ACK A-30.9 encoder works with all modern mode A/C and mode S transponders.
$249.00 -
AFM8 Crimp Tool Kit
The Daniels AFM8 crimp tool is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems. The AFM8 Kit is organized in a case with a foam insert to hold 3 positioners, 2 plastic insert/removal tools, and the AFM8 crimp tool.
$834.95AFM8 Crimp Tool Kit
$834.95 -
Shadin Digiflo-L Digital Fuel Management System | Twin Engine
The Digiflo-L is a Digital Fuel Management System designed to provide complete fuel management information under real flight conditions without any manual entry of data (after entry of the initial fuel on board information). Digiflo-L is connected to the engine fuel flow transducer for fuel flow information and to the Loran-C or GPS receiver serial port for navigation data (ground speed, distance, and estimated time en route).
$2,175.00 -
Passive GPS Antenna Splitter
LDCBS1X2 passive GPS antenna splitter from GPS Networking has one input and two outputs and is based on the Wilkinson splitter design.
$349.95Passive GPS Antenna Splitter
$349.95 -
Shading Transducer Install Kit (680501A)
Shadin Avionics’s Fuel flow transducer kit. Includes 680501A transducer and 90-degree elbow fittings.$795.00$1,000.00Shading Transducer Install Kit (680501A)
$795.00$1,000.00 -
ACK E-04 ELT Retrofit Kit
ACK E-04 ELT Retrofit Kit is a direct replacement for the model E-01 ELTs and transmits on 406 as well as 121.5 MHz. For increased accuracy, it can also accept NEMA 0183 GPS position data from Garmin and Bendix/King GPS. The E-04 external antenna will utilize a current antenna mounting and wiring installation.
$824.95ACK E-04 ELT Retrofit Kit
$824.95 -
-
Shadin Digiflo-L Harness – Twin Engine
Shadin’s pre-wired, fully shielded, high-quality harness for use with Digiflo-L for twin-engine aircraft. 20 feet long.
$244.95 -
$524.00
$566.00Shadin 681201-1 OAT Probe Assembly Kit
$524.00$566.00 -
ACK A-30.5 Altitude Encoder | Gray Code, TSO’d
ACK A-30.5 Altitude Encoder, equipped with advanced solid-state electronics, offers exceptional reliability. With a swift and effortless installation process that typically takes less than an hour, it is designed to be compatible with most of the transponders currently in operation, reporting altitudes up to 30,750 ft.
$244.75
