-
MERL BP-1010 ELT Battery Pack | 2yr Replacement Battery For Narco ELT 10
MERL BP-1010 ELT Battery Pack is a TSO-approved replacement battery for Narco ELT 10. Rated for two years.
$119.75 -
RAMI AV-10 VHF Antenna
RAMI AV-10 VHF communications antenna designed for high-performance aircraft applications. It exhibits excellent electrical characteristics and incorporates an efficient aerodynamic 4-bolt mounting base.
$189.95RAMI AV-10 VHF Antenna
$189.95 -
DRK38 Removal tool
The Daniels DRK38 is a removal tool for D-Subminiature coaxial contacts.
$117.95DRK38 Removal tool
$117.95 -
GMT232 Hand Crimp Tool
The Daniels GMT232 Hand Crimp Tool is designed to crimp low profile environmental splices.
$247.50GMT232 Hand Crimp Tool
$247.50 -
RAMI AV-801 WAAS GPS Antenna
RAMI’s AV-801 GPS antenna is designed specifically to meet FAA TSO-C190 specifications. Qualification testing includes meeting the requirements of RTCA DO-301 and DO-160G. The mounting footprint matches the standard ARINC found on many general aviation aircraft up to and including business jets.
$342.75RAMI AV-801 WAAS GPS Antenna
$342.75 -
HX4 Crimp Tool – M22520/5-01
Qualified to AS22520/5, the DMC HX4 crimp tool features a system of interchangeable dies (accommodates “Y” series dies) which eliminates the need for separate fixed die crimp tools for each and every different application. Many maintenance and production organizations have standardized on one of these models, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single purpose, dedicated tools.
$496.95HX4 Crimp Tool – M22520/5-01
$496.95 -
RAMI AV-529 VHF Antenna
RAMI’s AV-529 is a certified antenna designed for broadband communications (118-137 MHz). It has a die-cast aluminum base and a uniquely designed radiator encapsulated in a fiberglass whip. The antenna is supplied with a weather-sealing gasket and mounting hardware.
$197.95RAMI AV-529 VHF Antenna
$197.95 -
RAMI AV-74-1 DME Transponder Antenna | 960-1220 MHz
RAMI AV-74 DME Transponder Antenna is a broadband blade type antenna for transponder or DME application. The antenna housing is constructed of an acrylonitrile-styrene-acrylic (ASA) shell. The white color allows maximum performance without losses due to color pigments or unseen dirt. The antenna is supplied with cellular neoprene mounting pad and hardware.
$162.95 -
PIDG Butt Splice | 24 – 20 AWG Wire Size (50pcs)
PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of a nylon or PVC insulated body, plus a metal sleeve that clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.
$23.50 -
AFM8 Crimp Tool Kit
The Daniels AFM8 crimp tool is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems. The AFM8 Kit is organized in a case with a foam insert to hold 3 positioners, 2 plastic insert/removal tools, and the AFM8 crimp tool.
$834.95AFM8 Crimp Tool Kit
$834.95 -
RAMI AV-300 ELT Rod Antenna
The AV-300 ELT antenna is designed to be paired with a 406 MHz ELT for General Aviation. It’s a passive tri-frequency rod antenna made of fiberglass, suited for aircraft operating at speeds up to 350 knots. This antenna adheres to the DO-160G, Section 8, Category U standards for vibration resilience and is approved for use on helicopters, irrespective of their rotor frequencies.
$289.75RAMI AV-300 ELT Rod Antenna
$289.75 -
#10 PIDG Ring Terminal | 22 – 16 AWG Wire Size (100pcs)
PIDG terminals are designed for uniform reliability in the harshest circuit environments, especially where high vibration and movement become factors. These terminals consist of a nylon or PVC insulated body, plus a metal sleeve that clamps to the wire adding support. The design of the wire barrel resists vibration while allowing the wire to bend in any direction without damaging the insulation or conductor.
$19.95 -
Vehicle Antenna 108/512 Mhz
Snap-in mount provides quick, permanent installation in a 3/8 inch (9.5 mm) hole; no soldering required. The whip is fastened by a set screw adapter and may be easily removed for fine-tuning or replacement. Cutting chart supplied
$59.95Vehicle Antenna 108/512 Mhz
$59.95 -
RAMI AV-585 Antenna Diplexer/Splitter
RAMI’s AV-585 is a diplexer/splitter providing two VOR/ LOC and two GS outputs from one VOR/LOC/GC antenna. It is a direct replacement for the Comant’s CI-1125.
$178.95 -
AFM8 Miniature Adjustable Indent Crimp Tool
The Daniels AFM8 crimp tool is designed for most of the miniature and sub-miniature connector types that are so widely used in all types of electronic systems.
$469.95