No products in the cart.
Shadin Digiflo-L Harness – Twin Engine
Shadin’s pre-wired, fully shielded, high-quality harness for use with Digiflo-L for twin-engine aircraft. 20 feet long.
$244.95- $524.00
$566.00Shadin 681201-1 OAT Probe Assembly Kit
$524.00$566.00 - $255.00 – $275.00
Artex ME406 HM ELT – Complete Kit
Artex ME406 HM ELT is a single-output ELT designed for helicopters that uses the same RF output and only one coax cable to transmit a 406 MHz emergency signal to the Cospas-Sarsat satellites and a local 121.5 MHz homing signal.
$4,675.00Artex ME406 HM ELT – Complete Kit
$4,675.00Artex ME406 ACE ELT Remote Switch
Artex Self-Powered Remote Switch for ME406 ACE fits exactly into the cut-out of the ACK ELT remote switch on the instrument panel of an aircraft. For Ameri-King ELT system upgrades, the cut-out needs to be slightly adapted.
$287.95True Blue TC280 AC to DC Converter | 280 Watts
The highly efficient TC280 AC-to-DC Converter produces 280 watts of power from an aircraft’s 115 VAC input. Engineered to run cooler and featuring a fanless design, the TC280 saves energy and reduces weight.
$2,795.00True Blue TI500 DC to AC Inverter | 500 Watts
TI500 DC to AC Inverter from True Blue Power produces 500 watts at 115 volts of “wall outlet” power from an aircraft’s 28 VDC input to power multiple cabin accessories – laptops, cell phones, MP3 players, and other devices
$3,475.00ACR Artex 110-333 High Speed ELT Blade Antenna | 121.5, 243 MHz & 406 MHz
Artex 110-333 Dual-Input, Tri-Band Blade high-speed antenna provides our innovative Tri-Band technology, bringing the 121.5, 243, and 406 MHz frequencies into a compact package.
$5,125.00Artex ME406 Mounting Tray
Mounting tray for use with Artex ME406 ELTs. The tray comes with a metal strap to comply with TSO C126b.
$114.95Artex ME406 Mounting Tray
$114.95Synchro Heading Input Converter | ARINC 429
The converter accepts the Magnetic Heading (ARINC 407 3-wire Synchro Data Inputs) and converts to A-429 low-speed output label 320.
$2,695.00AvMap EKP V A2 ADAHRS Module
The AvMap A2 ADAHRS module is packed with a solid-state 3-axis gyro, accelerometer, magnetic field sensor, and air data sensors. The added A2 ADAHRS module extends the functionality of the EKP V and turns it into AvMap EFIS (Electronic Flight Information System), a centralized display for both navigation and primary flight information.
$795.00$965.00AvMap EKP V A2 ADAHRS Module
$795.00$965.00Artex ELT 1000 Tri-Band Antenna | 8603
Encased in a durable polyester housing, this Artex ELT 1000 Tri Band rod antenna incorporates cutting-edge Tri-Band technology, seamlessly integrating 121.5, 243, and 406 MHz frequencies into a compact package.
$672.75Shadin RS232 to RS442 / RS422 to RS232 Converter
A factory new Shadin RS232 to RS442 / RS422 to RS232 Converter is designed to translate serial data from either RS-232 or RS-422 format into the alternate format. This versatile converter can process any serial data format and functions as a bi-directional level translator, featuring two separate conversion channels for simultaneous data conversion.
$1,174.95Artex DGL-1 Programming Dongle
Artex DGL-1 programming dongle allows the fleet operator to program an aircraft’s 24-bit (Standard Message Protocol) address into a compatible Artex ELT. The DGL-1 is designed to attach to the top cover – both the cover and the dongle remain in the aircraft; all that is needed is to swap out the ELTs. Once the ELT is installed, the DGL-1 automatically reprograms the ELT. This makes it easy for ELTs to be switched between aircraft conveniently and effectively with reduced maintenance and downtime.
$1,245.75Artex DGL-1 Programming Dongle
$1,245.75Artex Teflon Coax Cable | BNC
Artex 611 series is a Teflon-coated coaxial cable specifically designed to connect an antenna to a 406MHz frequency ELTs. Its inner conductor consists of a solid silver-coated, copper-clad steel wire, while the outer conductor features a double-braided, silver-coated construction.
$227.50Artex Teflon Coax Cable | BNC
$227.50