-
ACK E-04 ELT Series Replacement Battery | 5-year, Lithium
Lithium (LiMnO2) battery replacement for use with ACK E-04 Series 406 MHz ELT. Rated for 5 years.
$264.95 -
ACK E-04 ELT Complete System Kit
ACK’s E-04 ELT is a direct replacement for the more than 62,000 ACK E-01 ELT’s models on the market today. The E-04 fits directly into the current E-01 mounting trays and uses the same remote control panel indicator. The E-04 external antenna will utilize your current antenna mounting and wiring installations.
$824.75ACK E-04 ELT Complete System Kit
$824.75 -
ACK ELT E-04 Whip Antenna
ACK’s E-04.8 is a 406/121.5 MHz ELT whip antenna designed for the E-04 406 Emergency Locator Transmitter. It features a monopole, dual-frequency design, and can operate up to 260 knots.
$104.95ACK ELT E-04 Whip Antenna
$104.95 -
ACK A-30.9 (Mod 9) Encoder | Two RS 232 Outputs
The ACK A-30.9 encoder works with all modern mode A/C and mode S transponders.
$249.00 -
Kannad 406 Series ELT Replacement Battery
The replacement battery pack for McMurdo Kannad 406 Series ELTs. The lithium (LiMn02) battery pack is rated for six years and includes the installation kit.
$1,174.95 -
Shadin Digiflo-L Digital Fuel Management System | Twin Engine
The Digiflo-L is a Digital Fuel Management System designed to provide complete fuel management information under real flight conditions without any manual entry of data (after entry of the initial fuel on board information). Digiflo-L is connected to the engine fuel flow transducer for fuel flow information and to the Loran-C or GPS receiver serial port for navigation data (ground speed, distance, and estimated time en route).
$2,175.00 -
Shading Transducer Install Kit (680501A)
Shadin Avionics’s Fuel flow transducer kit. Includes 680501A transducer and 90-degree elbow fittings.$795.00$1,000.00Shading Transducer Install Kit (680501A)
$795.00$1,000.00 -
ACK E-04 ELT Retrofit Kit
ACK E-04 ELT Retrofit Kit is a direct replacement for the model E-01 ELTs and transmits on 406 as well as 121.5 MHz. For increased accuracy, it can also accept NEMA 0183 GPS position data from Garmin and Bendix/King GPS. The E-04 external antenna will utilize a current antenna mounting and wiring installation.
$824.95ACK E-04 ELT Retrofit Kit
$824.95 -
Shadin Digiflo-L Harness – Twin Engine
Shadin’s pre-wired, fully shielded, high-quality harness for use with Digiflo-L for twin-engine aircraft. 20 feet long.
$244.95 -
$524.00
$566.00Shadin 681201-1 OAT Probe Assembly Kit
$524.00$566.00 -
ACK A-30.5 Altitude Encoder | Gray Code, TSO’d
ACK A-30.5 Altitude Encoder, equipped with advanced solid-state electronics, offers exceptional reliability. With a swift and effortless installation process that typically takes less than an hour, it is designed to be compatible with most of the transponders currently in operation, reporting altitudes up to 30,750 ft.
$244.75 -
Kannad Integra 406 GPS AF ELT – Unit & Battery
The Kannad Integra 406 AF ELT with an internal 406 MHz antenna is a highly efficient option for individual or fleet operators looking to equip or retrofit their aircraft or helicopter with a 406 MHz ELT with GPS capabilities.
$1,225.00 -
Kannad ELT Universal Compact Mounting Tray | 1 Strap
Kannad universal ELT compact mounting tray is compatible with most 121.5 MHz ELT beacons on the market. This bracket saves installation time and costs as no drilling or cable change is required.
$114.95 -
Kannad ELT Universal Mounting Tray | 1 Strap
Kannad ELT universal mounting tray is designed to fit Kannad 406 AP, AP-H, AF, AF-H, automatic three-frequency ELTs. Also suitable for Kannad Navigation Interface unit.
$147.95 -
Synchro Heading Input Converter | ARINC 429
The converter accepts the Magnetic Heading (ARINC 407 3-wire Synchro Data Inputs) and converts to A-429 low-speed output label 320.
$2,695.00
