No products in the cart.
Roll over image to zoom in
Click to open expanded view
Trig TT31 Mode S, ADS-B Out Transponder
$2,839.00 See Our Price in Cart
Our Price: $2,595.00
You Save: $244.00 (8.59%)
Trig TT31 - The ADS-B capable Mode S Transponder that saves both the installation time and money.
The TT31 is now STC'd for interface with Garmin GNS400W & GNS500W series navigators for full ADS-B compliance.
Trig TT31 Transponder is the perfect retro-fit unit for the popular Bendix King KT76A and KT78A transponders. The TT31 is a certified Class 1 transponder that will ‘plug and play’ straight into the existing Bendix King tray, significantly reducing both installation time and cost. It provides pilots with class-leading Mode S technology that is also 1090ES ADS-B Out capable too – to the latest international standard.
Trig TT31 Transponder Features
- Certified for IFR / VFR flight – meets TSO-C166b
- Improved retrofit performance – ‘plug and play’ Mode S for KT76A, KT76C and KT78A
- ADS-B Out – using popular GNS and GTN WAAS navigators
- Free FAA ADS-B STC for 650 aircraft types
- Trig Express Lane – for the fastest installation
- Amongst the lowest power consumption in class
- Backlit LED display
- No cavity tube – no warm up time required (no need for dropper resistors)
- Software provides the widest compatibility with third party avionics
- Two-year warranty from date of install, U.S. based technical support
Trig TT31 1090ES ADS-B Out Transponder
Replacing your old transponder or updating your aircraft avionics? If so, the TT31 should be your conventional panel mount transponder of choice. Fixed-wing and rotary pilots around the world have selected the TT31 for its superior features, great value, and superb support.
The TT31 is the easiest upgrade to the popular KT76A, KT76C and KT78A, with plug and play Mode S capability – this transponder gets to work straight out of the box.
2020 ADS-B Compliance
As a fully capable 1090 MHz Extended Squitter ADS-B Out transponder, the Trig TT31 Transponder is TSO approved by the FAA to C166b. This makes the TT31 compliant with the latest ADS-B requirements and ensures that it is fit for the future.
The TT31 is compatible with many popular GPS position sources including Garmin GNS 400W / 500W series navigators and the Trig TN70. This makes installation flexibility the best in class.
Trig TT31 Transponder also provides data link support for TIS traffic. Connecting a suitable panel or remote display will show the position of local and conflicting aircraft traffic – this information is sent from TIS ground stations (where available).
Trig TT31 – Low Power, High Performance
The transponder has a bright and easy-to-read backlit display. Operation is simple via a conventional rotary knob, enabling rapid selection of Squawk code and Flight ID. The TT31 comes with additional features that include a stop watch, flight timer, and altitude alarm.
Trig TT31 Transponder is truly efficient using half the power of most legacy transponders. It needs no warm-up time and is ready to work as soon as you strap in. The reliability of aircraft avionics can be adversely affected by excessive heat, the TT31’s low power consumption produces less heat in your avionics stack and significantly reduces loading on your aircraft’s electrical system. This efficiency has no impact on performance; as a consequence fitting a TT31 actually enhances the reliability of your entire avionics system.
The TT31 is a great new or retro-fit solution; it operates at 240 watts from either a supply voltage of 14 or 28 volts. Installation is straightforward without any special configuration or dropper resistors.
The TT31 can use either a parallel or serial altitude encoder and can even act as a serializer for your GPS baro-aiding input.
|Dimensions||1.5 × 6.30 × 9.40 in|
Class 1 Mode S Level 2 els
ETSO C166A, 2C112B
ED-73B, DO-160E, DO-178B Level B,
11 VDC — 33 VDC
|Typical Current Consumption|
Idle: 0.22 A @ 14 VDC
|Nominal Transmitter Power|
240 W at the connector
-20°C to + 70°C
No Fan Required