No products in the cart.
xCruze 100 Basic Servo – B Model
BendixKing Basic Servo B designed for the xCruze 100 Autopilot.
$604.95xCruze 100 Basic Servo – B Model
$604.95Pilot USA P-200T Intercom | 2 Users, Cell Input
The PA-200T is a 2 Place Mono Intercom offering clear communications. Adjustable volume control and squelch control allow for easy precise adjustment for all levels of ambient noise. Two push-to-talk switches (not included) can be used with the intercom allowing transmission through the radio.
$114.95Artex ME406 HM ELT – Complete Kit
Artex ME406 HM ELT is a single-output ELT designed for helicopters that uses the same RF output and only one coax cable to transmit a 406 MHz emergency signal to the Cospas-Sarsat satellites and a local 121.5 MHz homing signal.
$4,675.00Artex ME406 HM ELT – Complete Kit
$4,675.00BendixKing AeroNav 800 GPS/FMS/NAV/COM
AeroNav 800 is a full-featured, 4.8″ GPS/FMS/NAV/COM with hybrid touch, wireless connectivity, and synthetic vision built right in.
$13,450.00$15,160.00BendixKing AeroNav 800 GPS/FMS/NAV/COM
$13,450.00$15,160.00Artex ME406 ACE ELT Remote Switch
Artex Self-Powered Remote Switch for ME406 ACE fits exactly into the cut-out of the ACK ELT remote switch on the instrument panel of an aircraft. For Ameri-King ELT system upgrades, the cut-out needs to be slightly adapted.
$287.95ACR Artex 110-333 High Speed ELT Blade Antenna | 121.5, 243 MHz & 406 MHz
Artex 110-333 Dual-Input, Tri-Band Blade high-speed antenna provides our innovative Tri-Band technology, bringing the 121.5, 243, and 406 MHz frequencies into a compact package.
$5,125.00BendixKing KY 97 VHF Communication Tranceiver | 14V
BendixKing KY 97A is reliable VHF radio designed to operate on 760 frequencies from 118.00 MHz to 136.975 MHz.
$2,925.00$3,125.00BendixKing KY 97 VHF Communication Tranceiver | 14V
$2,925.00$3,125.00Artex ME406 Mounting Tray
Mounting tray for use with Artex ME406 ELTs. The tray comes with a metal strap to comply with TSO C126b.
$114.95Artex ME406 Mounting Tray
$114.95Pilot USA PA-1161 Headset
Pilot USA PA-1161 Headset is a full-featured, entry-level, affordable headset that is well-suited for beginning pilots, passengers, and pilots on a budget.
$134.75Pilot USA PA-1161 Headset
$134.75BendixKing KT 76C Transponder
The BendixKing KT 76C transponder is a radio transmitter/receiver which operates on radar frequencies. Receiving ground radar interrogations at 1030 MHz, it returns a coded response of pulses to ground-based radar, or airborne TCAS receivers, on a frequency of 1090 MHz.
$2,175.00$2,275.00BendixKing KT 76C Transponder
$2,175.00$2,275.00BendixKing ANT-67A TCAS Directional Antenna
Factory new BendixKing ANT-67A TCAS directional antenna designed to connect with CAS-66A and CAS-67A TCAS I & II processor units. This ANT-67A version – Part Number 071-01548-0200 – features a 0.73″ coax connector.
$9,270.00Artex ELT 1000 Tri-Band Antenna | 8603
Encased in a durable polyester housing, this Artex ELT 1000 Tri Band rod antenna incorporates cutting-edge Tri-Band technology, seamlessly integrating 121.5, 243, and 406 MHz frequencies into a compact package.
$672.75BendixKing KSM 375 Servo Mount
BendixKing KSM 375 Servo Mount is a high-quality, robust accessory designed for optimal performance and precision. Engineered for the effortless installation and secure placement of servos, this mount enhances your system’s overall performance and reliability. This factory new KSM 375 servo mount – PN 065-00015-0100 – is designed for 1/16″ cable.
$4,870.00BendixKing KSM 375 Servo Mount
$4,870.00BendixKing KTR 908 | SELCAL
BendixKing KTR 908 VHF Communications Transceiver features a wide spectrum of 760 frequencies, complemented by automatic squelch and audio leveling. It offers a power output of 20 watts for both transmission and reception. This model includes SELCAL capabilities.
$4,175.00BendixKing KTR 908 | SELCAL
$4,175.00Artex DGL-1 Programming Dongle
Artex DGL-1 programming dongle allows the fleet operator to program an aircraft’s 24-bit (Standard Message Protocol) address into a compatible Artex ELT. The DGL-1 is designed to attach to the top cover – both the cover and the dongle remain in the aircraft; all that is needed is to swap out the ELTs. Once the ELT is installed, the DGL-1 automatically reprograms the ELT. This makes it easy for ELTs to be switched between aircraft conveniently and effectively with reduced maintenance and downtime.
$1,245.75Artex DGL-1 Programming Dongle
$1,245.75