-
xCruze 100 Basic Servo – B Model
BendixKing Basic Servo B designed for the xCruze 100 Autopilot.
$604.95xCruze 100 Basic Servo – B Model
$604.95 -
Sandia STX 165R Remote Transponder – Certified
Sandia Aerospace STX-165R Remote Mode C Transponder is a remote unit that is controlled by existing aircraft navigation units. Sandia STX 165R is a remote Mode C transponder that weighs only 1.16lbs and requires a mere 200mA current at 28Vdc. It can be fully controlled by aircraft navigators with the capability. This transponder will work with MGL, GRT, DYNON Avionics, and Advance Flight. It is also ideally suited for use in UAVs where weight and current are primary concerns.
$1,875.00$1,975.00Sandia STX 165R Remote Transponder – Certified
$1,875.00$1,975.00 -
Sandia ACF 314 Cooling Fan | 14 VDC, 3-Port
Sandia’s ACF 314 is a cutting-edge cooling system designed to cool up to three avionics units efficiently. With an impressive airflow capacity of up to 20 cubic feet per minute, it ensures optimal cooling performance. Operating on 14 VDC, this system effectively maintains the avionics equipment at the required operating temperature.
$374.95 -
BendixKing AeroNav 800 GPS/FMS/NAV/COM
AeroNav 800 is a full-featured, 4.8″ GPS/FMS/NAV/COM with hybrid touch, wireless connectivity, and synthetic vision built right in.
$13,450.00$15,160.00BendixKing AeroNav 800 GPS/FMS/NAV/COM
$13,450.00$15,160.00 -
Sandia SAC 7-35 Air Data Computer
Sandia SAC 7-35 Air Data Computer contains an altitude encoder, altitude alerting, fuel flow, and air data computer. FAA TSO’d.
$2,925.00Sandia SAC 7-35 Air Data Computer
$2,925.00 -
Sandia ACF 528 Cooling Fan | 28 VDC, 5-Port
Sandia’s ACF528 is an FAA-PMA’d five port cooling fan producing cooling air for one to five avionics units. Supplying up to 20 cubic feet of cooling air per minute at 28 VDC, Sandia ACF528 can easily cool an entire avionics stack.
$417.95 -
BendixKing KT 76C Transponder
The BendixKing KT 76C transponder is a radio transmitter/receiver which operates on radar frequencies. Receiving ground radar interrogations at 1030 MHz, it returns a coded response of pulses to ground-based radar, or airborne TCAS receivers, on a frequency of 1090 MHz.
$2,175.00$2,275.00BendixKing KT 76C Transponder
$2,175.00$2,275.00 -
Sandia ACF 328 Cooling Fan | 28 VDC, 3-Port
Sandia ACF 328 Cooling Fan is able to cool up to three avionics units with up to 20 cubic feet of cooling air per minute. It operates on 28 VDC and maintains avionics equipment at proper operating temperature. These cooling fans use high quality, brushless blower motors and use RunQuiet technology. These units are FAA PMA approved and pass stringent environmental testing to ensure years of reliable service.
$374.95 -
BendixKing KS 272C Trim Servo | 3.6 RPM
The Bendix King KS272C Trim Servo is a high-performance, FAA-certified servo used primarily for elevator trimming in aircraft. With a reliable operating speed of 3.6 RPM and a voltage rating of 28V, this trim servo ensures smooth and precise control during flight operations.
$2,875.00BendixKing KS 272C Trim Servo | 3.6 RPM
$2,875.00 -
BendixKing ANT-67A TCAS Directional Antenna
Factory new BendixKing ANT-67A TCAS directional antenna designed to connect with CAS-66A and CAS-67A TCAS I & II processor units. This ANT-67A version – Part Number 071-01548-0200 – features a 0.73″ coax connector.
$9,270.00 -
BendixKing KSM 375 Servo Mount
BendixKing KSM 375 Servo Mount is a high-quality, robust accessory designed for optimal performance and precision. Engineered for the effortless installation and secure placement of servos, this mount enhances your system’s overall performance and reliability. This factory new KSM 375 servo mount – PN 065-00015-0100 – is designed for 1/16″ cable.
$4,870.00BendixKing KSM 375 Servo Mount
$4,870.00 -
BendixKing KTR 908 | SELCAL
BendixKing KTR 908 VHF Communications Transceiver features a wide spectrum of 760 frequencies, complemented by automatic squelch and audio leveling. It offers a power output of 20 watts for both transmission and reception. This model includes SELCAL capabilities.
$4,175.00BendixKing KTR 908 | SELCAL
$4,175.00 -
MidContinent MD23 Flex Digital Counter Drum Altimeter | 2″
MidContinent MD23 digital altimeter features high-resolution graphics, an operating range of up to 55,000 feet, user-selectable vertical speed indication, and a six-second vertical trend. TSO certified.
$4,975.00 -
BendixKing KEA-130A Encoding Altimeter
BendixKing KEA-130A Encoding Altimeter displaying altitude up to 35,000 feet is an ideal altimeter unit for new installations. Reports the altitude to the ATC via transponder and features dual barometric scales with inches of mercury and millibars.
$8,975.00BendixKing KEA-130A Encoding Altimeter
$8,975.00 -
BendixKing xCruze 100 Glasair I/II Install Kit
The xCruze installation kit part number 8700-004 is designed for Glasair I/II aircraft and is compatible with xCruze 100 – 2″, 3″, flat pack, and xCruze 110 models.
$469.95
